CO2 Scrubber for DM water tanks / CO2 Breather Filters

Tanks CO2 Scrubber


Alfaintek design and manufacture CO2 scrubbers / CO2 Tank Breather Filters for the removal of CO2 from the airflow during emptying of storage tanks.

Carbon Dioxide Removal System for Demineralized Water Tanks prevents penetrating of carbon dioxide (CO2) by removing it from supply air.

CO2 Scrubber / CO2 Tank Breather Filter is mounted on the respiratory valve of the tank. It can be assembled either on the top of the tank or on the ground. The CO2 filtration efficiency up to 100% enables a high quality of demineralized water.

Advantages of our water tanks CO2 scrubbers / CO2 Tank Breather Filters:
Easy maintenance
Flange connection *
* according to customer request

 

For enquiries, please contact us by phone or e-mail with the information on our Contacts Page.

High quality of demineralised water is important for such industries as power generation, semiconductor and pharmaceutical where there are strict regulatory requirements.

The most common way to measure very low levels of ionic impurities in ultra pure water is on line analysis of conductivity and resistivity. Demineralized water is often exposed to CO2 from the air, which increases its conductivity and gives the appearance of a contaminant in the water. Depending on CO2 concentration in incoming air water conductivity can be increased to ~0.8-1.5 µS/cm.

 

CO2 Scrubber for DM Tanks allows you to keep stable pH and low conductivity of demineralized water.

 

 

 

CO2 Tank Breather Filters graund location

CO2 Scrubber / CO2 Tank Breather Filter is mounted on the respiratory valve of the tank either on the top of the tank or on the ground.

CO2 Tank Breather Filters top location

CO2 Tank Breather Filters for Demineralized Water Tank Vents/ CO2 Scrubber for tanks is to be installed at the tank vent to prevent CO2 entrance in to the DM water storage tank. The intention is to avoid CO2 present in the air entering the tank.