Tank Desiccant Breathers

Problems with corrosion, moisture and contaminants in the storage tanks with any volume of airflow can be solved with Alfaintek Tank Desiccant Breathers.

The Alfaintek Tank Desiccant Breather blocks the atmospheric air moisture from penetrating the storage tank at the time of draining and thermal inbreathing. Important chemicals can be kept free of water contamination with the use of the Tank Desiccant Breather. By preventing the moisture from the surrounding air from condensating inside the storage tank, the Alfaintek Tank Desiccant Breathers help to store products with higher level of purity which have ability to mix with water.

Filling of the tank can produce gases that can be neutralized with specific carbon filters supplied with Alfaintek Tank Desiccant Breathers. The carbon filters eliminate many contaminants including Formaldehyde, Oxides of Nitrogen, Hydrogen Sulphide, Sulphur Dioxide and many more.

The Alfaintek Tank Desiccant Breathers are equipped with carbon filters and silica gel desiccants which offer the highest protection for a broad variety of materials.

Our standard Tank Desiccant Breather models with leg mounting can be positioned on the ground near the tanks with an easy access for maintenance and inspection.

A highly efficient desiccant in the Tank Desiccant Breather filters the incoming air before it enters the tank. The desiccant must be replaced after it has approached its saturation point with Alfaintek service and maintenance parts.

Even a large storage tank with high air flow can sustain a pressure drop lower then 2,5 mbar by using the Alfaintek Tank Desiccant Breathers.

For many tank-stored products moisture can be a harmful contaminant. The Tank Desiccant Breather can reduce the moisture by simultaneously improving the service life of the storage tank and also the purity of the products stored within. The Alfaintek Tank Desiccant Breather is a must-have for all storage tanks to tackle against issues caused by unwanted moisture.

The advantages of Alfaintek Tank Desiccant Breather:

  • Construction is fully customizable even for large storage tanks with high airflow
  • Low pressure can be maintained with the help of Tank Desiccant Breather
  • Al galvanized steel or stainless steel are used as a standard material
  • A wide operating temperature of the Alfaintek Tank Desiccant Breather enables its use in both hot and cold climates
  • Easy cartridge exchange
  • Flange connection
  • Optional pressure vacuum relive valve
  • Improved adsorbents used for Tank Desiccant Breathers such as Silica Gel and a wide range of Activated Carbon and Chemical Sorbents